Battery Installation

Some robots that pass through customs do not have the batteries installed upon receipt. Therefore, it is necessary to manually install the lithium battery. This section contains detailed steps on how to install the battery.

GR-1 Battery Installation

1. Remove the back cover

2. Remove the inner cover and load the battery

3. Attach the inner and outer covers

GR-1 Pro Battery Installation

1. Remove the two rings

2. Unscrew the waist and neck screws

3. Carefully remove the back cover

4. Unscrew the screws of the inner cover

5. Load the battery

6. Attach the inner cover

7. Connect the internal cable to the connector on the cover

8. Attach the rear cover

9. Attach the ring and tighten the waist screws